ANALISA PENGARUH PERUBAHAN BEBAN TERHADAP KINERJA MOTOR INDUKSI 3 FASA SCRAPER CONVEYORDI PT. CITRA SIWIT LESTARI

Authors

  • Linda Sartika
  • abdul muis prasetia univeristas borneo tarakan
  • ishak Edison Nanda Nicholas

DOI:

https://doi.org/10.25124/jett.v10i1.5999

Keywords:

Power, Rotational, speed, MAPE

Abstract

An organization or sector now needs to own a three-phase induction generator. The condition in which the factory was in operation forced the 3-phase scraper conveyor induction motor at PT Citra Sawit Lestari to continue to move the palm oil that is transported from the truck to the thresher. This process continues as long as the factory operates Under these conditions the load obtained by the 3-phase scraper conveyor induction motor affects the condition and performance of the induction motor This research was conducted on a 3-phase scraper conveyor induction motor using a quantitative approach that allowed the company to find out the causes of the reduced performance of 3-phase induction motors and find out the actions that must be taken so that the performance of 3-phase induction motors remains optimal Based on this research, it was concluded that changes in load could affect the performance of a 3-phase induction motor and the MAPE value of motor torque was 0.038%, motor power is 0.0008%, and rotational speed is 0.025%. With an average MAPE percentage value of less than 10%, this indicated that the performance of the 3-phase induction motor was still very good.

Downloads

Download data is not yet available.

References

Hardiati, S., Oktafiani, F., Pristianto, J, Praludi, T., dan Wijayanto, Y., N. 2009. “Pengendali Motor Induksi 3-Phase pada Aplikasi Industri Plastik, Jurnal INKOM, Vol. III, No. 1-2.

Antonov, dan Oktariani, Y. 2016. “Studi Pengaruh Torsi Beban Terhadap Kinerja Motor Induksi Tiga Fase”, Jurnal Teknik Elektro ITP, Volume 5, No. 1, hal. 9-15.

Mado, I., Soeprijanto, A., dan Suhartono. 2018. “Appliying of Double Seanonal AIRMA Model for Electrical Power Demand Forecasting at PT. PLN Gresik Indonesia”, International Journal of Electricaland Computer Engeneering (IJECE), Vol. 8, No. 6, hal. 4892-4901.

Syawaluddin, W., Atma, dan Zondra, M. 2019. “Analisis Perubahan Beban Terhadap Torka Motor Induksi Tiga Phasa pada PLTU Tenayan Raya”, SainETIn (Jurnal Sain, Energi, Teknologi & industri), Vol. 3, No. 1, hal. 1-8.

Wibowo, S.,S., Manaf, A., dan Umar, T. 2020. “Analisis Pembebanan Belt Conveyor Menggunakan Motor Induksi 3 Fase1,5 kW dan VSD sebagai Speed Controller”, Jurnal Teknik : dan Ilmu Komunikasi, Vol. 08, No. 1, Hal. 2460-5549.

Digo, M., Situmeang, U., Zondra, E. 2022. “Analisis Kinerja Motor Induksi 3 Fase Pada Screw Press pabrik Kelapa Sawit di PT. Guna Agung Semesta”, Jurnal Sain, Energi, Teknnologi, dan Industri, Vol. 6, No. 2, hal. 66-72.

Suwarni, S., Prasetia, A, M. “Pengaturan Kecepatan Motor Induksi 3 Fasa dengan Direct Torque Control menggunakan Jaringan Saraf Tiruan”. Jurnal ELTEK. Vol. 20, Hal. 24-32.

Purnomo, E., A. 2020. “Analisa Kinerja Motor Induksi 3 Phasa 0,5 kW terhadap Pembebanan Tekanan Filter Duplex di PT.Arkof”.

Abdillah, I., S., M., dan Zuliari, A., E. 2018. “Analisa Kinerja Motor Induksi 3 Fasa pada Pompa Sentrifugal di Favehotel Rungkut Surabaya”, Seminar Nasional Sains dan Teknologi Terapan ITATS, Hal. 605-610.

Purwanto, M., dan Zuliari, E. 2019. “Analisa Kinerja Motor Induksi 218 HP 3 Phase pada Filterasi Produksi Tepung di PT. Indofood Sukses Makmur Div. Bogasari Flour Mils, Tbk”, Seminar Nasional Sains dan Teknologi Terapan VII, hal. 657-662.

Zulhadi, M., Atmam, dan Zondra., M. 2019. “ Analisa Perubahan Bebean Terhadap Kinerja Motor Induksi Tiga Phasa di PT. Baja Diva Manufacture”, Seminar Nasional Cendekiawan ke 5, hal, 1-7.

Bagia, N., I., dan Persa, M., I. 2018. “Motor-motor Listrik : Untuk Mahasiswa dan umum”.

Norhan, M. 2021. “Analisa Pengaruh Perubahan Beban Terhadap Kinerja Motor Induksi 3 Fasa (chain feeder) di PT. Pesona Khatulistiwa Nusantara”, Skripsi, Universitas Borneo Tarakan.

Downloads

Published

2023-07-24

Issue

Vol. 10 No. 1 (2023): JETT Juli 2023

Section

ELECTRONICS

License

 

Creative Commons License
This work is licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright Notice

An author who publishes in the Jurnal Elektro dan Telekomunikasi Terapan agrees to the following terms:

  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  • Author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-NonCommercial 4.0 International License. here: http://creativecommons.org/licenses/by-nc/4.0/.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.