Pemutus beban merupakan pengaman jika arus melebihi kapasitas beban. Kondisi ini teknisi tidak dapat langsung mengetahui lokasinya, hal ini berdampak pada kerugian bagi perusahaan penyedia listrik. Penelitian ini membuat sistem yang dapat memberikan informasi kepada teknisi ketika terjadi gangguan, yaitu gangguan arus dideteksi sensor arus ACS712 30 A, kemudian diproses oleh Arduino untuk mengaktifkan servo untuk membuka pemutus beban, sekaligus memberikan informasi status keadaan pemutus beban ke handphone petugas melalui modul GSM. Hasil pengujian menunjukkan bahwa sistem berfungsi dengan baik, dengan error pada sensor arus ACS712 30A 0,6 % pada pemutus beban 1 dan 2 serta 0,2 % pada pemutus beban 3. Modul GSM dapat mengirim dan menerima perintah sesuai dengan status sistem dari atau ke handphone user di lokasi dengan baik sesuai dengan tampilan LCD sistem yang meliputi informasi waktu dan tanggal.
Sarker, T., Rahman, A., Rahman, T., Sarker, A., Sarker, V. K., & Mahmud, Z. H. (2017, January). GSM & Microcontroller Based Three Phase Fault Analysis System. International Journal of Advancements in Research & Technology, 6(1).
Sonwane, N. S., & Pable, S. (2016, May). Fault Detection and Autoline Distribution System with GSM Module. International Research Journal of Engineering and Technology (IRJET), 3(5), 1764-1766.
Raju, P. R., Kumar, K. P., Teja, Y. G., Bhargav, K., & Prasanna, T. (2016, April). GSM Based Device Controlling and Fault Detection. International Journal of Computer Engineering In Research Trends, 3(4), 173-178.
Kumar S, R., Ravikumar B, Ponmudi B, & Kumar K, V. (2018, September). Electrical Power Robbery Detection and Transformer Fault Detection. International Journal of Engineering Research & Technology (IJERT), 3(9), 1-6.
Kennedy, O., Elizabeth, A., Robert, O., & John, S. (2017), Monitoring and Fault Detection System For Power Transmission Using GSM Technology. Int'l Conf. Wireless Networks | ICWN'17 |, (hal. 93-97).
Sonwane, N. D., & Dighe, D. D. (2016). Fault Detection and Autoline Distribution System with GSM Module. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 130-134.
Parihar, V. R., Jijankar, S., Dhore, A., Sanganwar, A., & Chalkhure, K. (2018). Automatic Fault Detection in Transmission Lines using GSM Technology. International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), 90-95.
Sidar, D. S., Agrawal, P., Aman, K., & Verma, A. (2018). GSM Technology Based Fault Detection In Overhead Transmission Line. International Journal of Advanced in Management, Technology and Engineering Sciences, 71-75.
Drugkar, S. W., Maske, K. R., & Gadekar, B. (2018). Transmission Line Fault Detection Using GSM Technology, International Conference on Emanations in Mordern Engineering Science & Management ( ICEMESM-2018 ), (hal. 1-5).
Jadhav, A., Suryavanshi, Y., Dewar, B. K., & Kumbhar, M. M. (2016, May). Automatic Electric Meter Reading & Monitoring System Using GSM. International Research Journal of Engineering and Technology (IRJET), 3(5), 1025.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright Notice
An author who publishes in the Jurnal Elektro dan Telekomunikasi Terapan agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-NonCommercial 4.0 International License. here: http://creativecommons.org/licenses/by-nc/4.0/.
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
