Sistem Pemantauan Tinggi Tanaman Cabai Berbasis Jaringan Menggunakan Modul ESP32-CAM pada Sistem Akuaponik

Penulis

  • Muhammad Rafly Juliyan
  • PORMAN PANGARIBUAN FTE-TELKOM UNIVERSITY
  • Denny Darlis

DOI:

https://doi.org/10.25124/jnst.v1i1.6724

Kata Kunci:

key Aquaponic, Monitoring, ESP-32 CAM

Abstrak

Aquaponics requires special attention in order to get maximum results. Therefore, this research will create a hardware device to monitor the growth of chili plants. Through the camera the height of the chili plants can be measured using image processing. this study the IoT-based chili plant height growth monitoring system uses the ESP-32 CAM in the aquaponic planting model connected via a website can make it easier to monitor the growth of chili plants. In this final project research using ESP-32 CAM as the main component. After testing the monitoring system on chili plants with a height of 12 cm, 23 cm, and 25 cm at a distance of 30. it was found that the ESP-32 CAM can detect the growth of chili plants at a height of 12 cm with an accuracy rate of 97,50% and at 23 cm high with an accuracy rate of 94,58%. And at a distance of 30 cm between the chili plants and the ESP-32 CAM with an accuracy rate of 97,32%. caused the condition of the distance between the camera and the chili plants will affect the process of detecting the size of the chili plants.

Unduhan

Data unduhan belum tersedia.

Unduhan

Diterbitkan

2023-12-07

Terbitan

Vol 1 No 1 (1): December 2023

Bagian

Articles

Lisensi

Authors who publish in this journal agree to the following rules:

  1. Authors retain copyright and give the journal the right of first publication, with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors may enter separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., posting it to an institutional repository or publishing it in a book), with attribution to the journal's initial publication.
  3. Authors are permitted and recommended to post their work online (such as in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges as well as earlier and greater citation of published work.