>>>> Download Writing Guidelines PDF File
Jurnal Rekayasa Sistem dan Industri (JRSI) can be accessed online at https://journals.telkomuniversity.ac.id/jrsi
Manuscripts accepted are manuscripts that have never been published or are not in the process of publication in other national or international scientific journals or proceedings.
Authors must refer to the writing instructions below when preparing the manuscript.
FORMAT
In order for the manuscript to be published, authors are expected to follow the specified format. The JRSI paper template can be downloaded via this link. The entire contents of the paper are written in Indonesian with a minimum of 6 pages in A4-single-sided papers format, Times New Roman font, and single line spacing.
The manuscript sections are written in the following order:
DETAILED DESCRIPTION OF THE MANUSCRIPT SECTION
Title.
The title must be written specifically and clearly in Indonesian and English. The Indonesian title is written in 20pt center, without bold and italic (except for foreign terms) followed by the English title with the same writing rules.
Author data.
The author can consist of more than one person, written without a title in sequence according to the author's order with a size of 11pt without bold and italic. Author affiliation is written under the author's name with a size of 10pt without bold and italic. If there is more than one affiliation, then the next affiliation is written under the previous affiliation. Email addresses are written under the affiliation of all authors with a size of 9pt without bold and italic separated by commas.
Abstract.
The abstract and contents of the paper are written in a two-column format with 0.17" spacing. The abstract is written in Indonesian followed by an abstract in English with no more than 250 words each with a size of 9pt. Keywords are written with a maximum of 6 keywords, where keywords must be included in the abstract.
Introduction.
Write the background of the research by explaining the existing problems and phenomena (preferably using data).
Literature Study.
This section discusses the theories used in conducting research and studies, and explains previous studies that are relevant to the problem or topic of the research study discussed.
Results and Analysis.
This section discusses the results and analysis of the studies discussed in the paper. The results and analysis are written in narrative form with tables and images if necessary.
Conclusion.
Write the conclusion of the article in narrative form and not in bullet or numerical form. Writing conclusions without suggestions.
Acknowledgements.
List the source of funding (institution, contract year) and to whom the grant was given along with the name of the person or party who assisted in this research (if any).
Bibliography.
List all the references used in the article. References in the form of journals (primary references) amount to at least 80% of the total references. The Journal of Systems and Industrial Engineering uses a citation method following the IEEE standard. All references cited in the manuscript must be listed in the bibliography.
Writing a bibliography:
Writing a bibliography in JRSI follows the IEEE Standard writing rules.
Bibliography from Books
Standard format:
[1] Author, Book Title. Edition. City of Publication: Publisher Name, Year of Publication.
If the source of the literature only uses a certain Chapter, then it is written in full as follows:
[1] Author, "Chapter/Section Title", in Book Title, edition. City of Publication: Publisher Name, Year of Publication, Chapter x, Subchapter x, pp. xxx-xxx
Special note: If the number of authors is more than three, then one person is written, add et al.
EXAMPLE:
[1] Oliviero, Andrew and Woodward, Bill, "Cable Design" in Cabling The Complete Guide To Copper and Fiber Optic Networking, 4th ed. United State of America: Wiley Publishing, Inc, 2009. pp. 19 – 33.
[2] J. Moran, Michael and Shapiro, H.N., Fundamentals Of Engineering Thermodynamics, 2nd ed. United States of America: John Wiley and Son, 1993.
[3] B. Stanley, et al., C++ Primer, Fourth Edition, Massachusetts: Addison Wesley Professional, 2005.
[4] Bell, A. Graham, “Performance Tuning”, in Theory and Practise – Four Stroke, First Edition, United of Kingdom: Haynes Publishing, 1981.
[5] Editor, Abdul Basri Saifuddin, et al., National Reference Book for Maternal and Newborn Health Services, 1st ed., Jakarta: Yayasan Bina Pustaka Sarwono Prawirohardjo, 2002
Bibliography from Seminar Articles
In general, the format for writing a bibliography for articles published at a seminar is: a list of authors, the title of the paper followed by the name of the seminar written in italics using the standard abbreviation below:
[1] Author, “Title of Paper,” in Name of Seminar of Conf., City of Seminar., Abbrev. State (if any), Year, pp. xxx-xxx.
Example:
[1] Utari, Setiya and Sarah, Lia Laela, “Development of Problem Based Instruction to Improve Student Learning Outcomes” in National Seminar on Science Education, FPMIPA UPI – JICA Bandung, 2010. pp. 56-70.
References from periodicals:
Periodic sources are sources published periodically, which can be journals or proceedings.
Standard format:
[1] Author, “Title of Paper”, Abbrev. Title of Periodical, vol. X, no. X, pp. xxx-xxx, Abbrev.Month, year.
References from Journals:
[1] R. E. Kalman, “New results in linear filtering and prediction theory,” J. Basic Eng., ser. D, vol. 83,
pp.95-108, Mar. 1961.
[2] Dirgagautama, Erdo and Saputro, Nico, “Application of Genetic Algorithm in Javanese Chess Game”, J.Integral. vol.9, pp. 17-26, Mar. 2004.
References from Proceedings:
[1] W. Rafferty, Ground antennas in NASA’s deep space telecommunications,” Proc. IEEE vol. 82, pp. 636-640, May 1994.
References from online sources:
Online sources are divided into several types, namely FTP, www, E-mail, telnet
References from FTP:
[1] Author. (year). Title (edition) [Media type]. Available FTP: Directory: File:www
[1] Author. (year, month day). Title (edition) [Media type]. Available: http://www.(URL).
References from e-mail:
[1] Author. (year, month day). Title (edition) [Media type]. Available e-mail: Message:
References from Telnet:
[1] Author. (year, month day). Title (edition) [Media type]. Available Telnet: Directory: File:
EXAMPLE :
[1] Koza, John.(2001, Nov.8) Operators of Genetic Algorithms [online].Available : http://www.cs.felk.cvut.cz/~xobitko/ga/operators.html.
[1] R. J. Vidmar. (1994).On the use of atmospheric plasmas as electromagnetic reflectors [Online]. Available FTP: atmnext.usc.edu Directory: pub/etext/1994 File: atmosplasma.txt
[3] S. H. Gold. (1995, Oct. 10).Inter-Network Talk [Online]. Available e-mail: COMSERVE@RPIECS Message: Get
Library from Network Talk:
[4] V. Meligna. (1993, June 11). Periodic table of elements [Online]. Available Telnet: Library.CMU.edu Directory: Libraries/Reference Works File: Periodic Table of Elements
Handbook/Manual References:
[1] Handbook/Manual Name, Edition, Company Name, Company City, Country, Year, pp. xx-xx
Report References:
[1] Author, “Title of Report,” Abbrev. Name of Co., City of Co., Abbrev. State, Rep. xxx, Year.
Patent References:
[1] Author, “Title of Patent,” Name of Country. Patent x xxx xxx, Abbrev. Month, day, year.
Standard References:
[1] Standard Title, Standard Number, date.
Theses and Dissertation References:
[1] Author, “Title of Thesis,” M.S. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.
[2] Author, “Title of Dissertation,” Ph.D. dissertation, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.
Bibliography of Unpublished Articles
There are two types of unpublished references, the basic writing format is:
Example:
[1] Author, private communication, Abbrev. Month, Year.
[2] Author, “Title of Paper,” unpublished.
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
Authors who publish in LOGIC: Jurnal Penelitian Informatika agree to the following terms:
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
This journal was previously accessible at https://jrsi.telkomuniversity.ac.id. However, for security reasons, we have moved to a new url site with the link https://journals.telkomuniversity.ac.id/jrsi ,all future publications and journal activities will now take place here.
Articles published up to Volume 11 will remain accessible on our previous website or can be accessed via the archive menu on the new platform. New issues and submissions will be available exclusively on the new JRSI platform.
Please update your bookmarks as needed.
Copyright of Jurnal Rekayasa Sistem & Industri (JRSI) (e-ISSN 2579-9142, p-ISSN 2356-0843) by Telkom University is licensed under CC BY-SA 4.0
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
e-ISSN 2579-9142
p-ISSN 2356-0843